Is there a video on Youtube on how to setup Edge Blending.
The guide on it within Community I find not that easy to follow.
I'll try and write out a detailed step-by-step for you in the next day or so. I also use dual-projector personally. Not sure if it helps any but the overlap blend area is 15%. My projectors project a solid blue area when they have no signal. I position the blue so it give full coverage splash on the screen and equal overlap past the centerline of the screen for dual projector. That gets the projection in the ballpark and from there I fine tune it winthin NTHUSIM.
Oops, didn't realize I missed this. Another active thread asked the same question and I though it was this thread. Here is a copy of instructions I gave in that thread:
Select "Dual Projector" and "Edge Blending" then "Configure" NTHUSIM Plus with 15% overlap. Use the mouse scroll-wheel to adjust the brightness of the blend. Use the F1, F2, F3, F4 keys to add and subtract control points. Then type "s" for save and "esc" to exit. Minimize NTHUSIM to the taskbar, don't close it out and you should be ready to use it in-game.
In demo mode, NTHUSIM pLus only works for 10 minutes. Once 10 minutes is passed, you'll need to restart NTHUSIM and then the game again.
I could do a detailed step by step with pictures, but configuration is pretty straight forward based on the instructions above. Let me know if you need more detail.
Hello.
Pls send also me a detail instruction step by step with pictures how to set Edge Blending with 2 projectors.
Tks in adwance for your help.

Can I add that I'm using 2 projectors only and after setting up nthusim I've having problems with the merging of objects on the screen not quite matching.
The edge blending guide obviously is for 3 projectors. Is there any help for the 2 projector setup?
Is there any thing in particular required when going through the line up.
I have my projectors overlapped and tried but at this point not happy with the outcome